This is a list of the most common parts needed for an IMT 6000-22 crane. This crane is currently no longer being manufactured but parts are still available. Click the part number to check our inventory.
If you have any questions, please call 330-724-3055 or email and have your Model and Serial Numbers ready for fastest service.
Qty. | Part No | Description | Notes |
---|---|---|---|
1 | 95724101 | DECAL KIT-TELE | |
1 | 95719348 | DECAL KIT-BODY | |
2 | 70399339 | DECAL-ID 6000 | |
2 | 70399345 | DECAL-LOAD BLOCK | |
3 | 70399340 | DECAL-CAPACITY | |
1 | 73051919 | MOTOR-HYD 101-1037 | |
2 | 72601949 | CAP SCR .50-1 | |
19 | 72060177 | CAP SCR .62-1 | |
1 | 60030433 | Wear pad RC-0 | |
2 | 60030339 | WEAR PAD-RND 0 | |
1 | 60030432 | WEAR PAD-RC 0 | |
4 | 60030431 | WEAR PAD-RC 0 | |
2 | 60030425 | WEAR PAD-RND 0 | |
4 | 60030427 | WEAR PAD-RND 0 | |
1 | 77041863 | SWITCH-LIMIT | |
2 | 52719629 | PIN-TYPE MM 1. | |
1 | 52723197 | PIN-TYPE MM 1. | |
1 | 71073035 | HOOK-SWVL L322AN-5T W/LATCH | |
1 | 70580230 | WIRE ROPE ASM-GALV.38(6X25)X85ft XIPS | was 70580182 |
1 | 60030134 | SHEAVE- 8.00 POLYMER | |
1 | 94399127 | SEAL KIT-51723 | seal kit cylinder 51723577 |
1 | 70056527 | SRB-E13.5-0 G8 Rotation Bearing | |
1 | 70395074 | O-RING-PARKER | |
2 | 70395076 | SEAL-NATL | |
1 | 70145786 | RING-SNAP SPRL | |
2 | 70055271 | BEARING-CONE T | |
2 | 70055281 | BRG-CUP TIMKEN | |
1 | 70145501 | RETAINER-BEARI | |
1 | 70056550 | WORM 170-10024 | |
2 | 73145506 | SHIM-METAL (.005") | |
2 | 73145505 | SHIM-METAL (.015") | |
2 | 73145504 | SHIM-METAL (.030") | |
1 | 76039295 | GASKET-GEA19 0 | was 76395075 |